Petrol Chip Power Module

  • 30 Day Money Back Guarantee
  • 2 Year Warranty
  • Improves fuel economy
  • Easy plug and go system

    • How a power module works

    This dyno-derived ECU tuning module offers gains in fuel efficiency, power and torque.

    The Elite Drive Power Module unit works smart to ‘fatten’ the torque profile of the engine, enabling it to produce big numbers from lower rpm for longer, reducing turbo lag and improving all round drive-ability.

    Real Results

    A realistic 30 per cent gain is usually achievable through the midrange, which can add around 70 Nm of torque to many engines. And with fuel prices creeping up and up, it’s reassuring to know our unit creates more power using less revs, meaning you save fuel too!

    Do you need installation? Our preferred installer is The Garage Miami on the Gold Coast.
    EliteDrive Petrol Power Module for Audi A6
    Free Australian Delivery . Get 10% off . Free Australian Delivery . Get 10% off .

    PETROL POWER MODULES

    EliteDrive
    EliteDrive Petrol Power Module for Ford Mondeo
    $895.50
    $995.00
    $895.50
    1/8

    Frequently Asked Questions

    What is an EliteDrive Power Module

    The Power Module intercepts your vehicle’s drive data and in real time is able to adjust your tune to match that of a real world dyno performance tune carried out on a vehicle exactly like yours.
    How does the Power Module achieve its performance?

    A dyno run is carried out, and 5 real world tunes are developed from mild to maximum. Those 5 tunes are then tested to make sure air/fuel ratio’s and exhaust gas temps are all within manufacturers specifications. Power gains are generated by applying dynamic fuel rail turning while simultaneously making available up to 3psi more boost which will bring your engine to life. The optimisation applied each map improve engine power and enhance performance that results in fuel savings and much more enjoyable drive.
    Will the Power Module cause excess wear on my engine?

    The Power Module is designed to work within the factory tolerances and design specifications of your engine, requiring no hardware upgrades for successful results. Our default maps do not excessively raise maximum fuel rail pressure, preventing wear on the vehicle’s fuel system.
    What power and torque gains can I expect?

    Every engine responds uniquely when tuned and results will vary across different mileages, but you can expect up to 30% gains in power and torque at various locations across the rev range. Estimates for each vehicle and engine type are available in the product pages for your vehicle Power Module. Select the current engine size, torque and power of your vehicle and an estimate will be shown of the improvement you can expect from the Power Module
    How easy is it to install?

    The Power Module is a Plug & Play installation. Because we use 100% OEM quality connections, this allows our plugs to connect safety to y our vehicles existing wiring loom and rail/fuel sensors. Most installs take under 20 minutes with a small delay to allow the vehicle to power down. Each vehicle installation instructions are individual depending on make, model and engine, however this is an example installation guide that comes with a Power Module, see link below.

    Install Instructions for Raptor
    Is this considered Live Tuning?

    The Power Module is reading information in real time from your fuel rail and boost sensors, adapting the fuel signal based on the Power Map selected, sending the modified signal out in real time. This means your vehicle is being constantly tuned as you drive.
    Does the Power Module save fuel?

    The Power Module creates more power and torque at lower revs, allowing you to drive in a higher gear than normal, using less fuel for the same workload. The byproduct of this is a fuel saving, especially driving on the motorway using a contstant throttle.